Vizio M221NV user manual Basic Controls and Connections, Front Panel, Jag Wheel Control

VIZIO M221NV User Manual

Chapter 2 Basic Controls and Connections

Front Panel

1.POWER ‘VIZIO’ LIGHT—The VIZIO name lights white when powered on and orange when powered off.

2.Remote Control Sensor—Point the remote control directly at this window on the lower left corner of your HDTV for the best response to the remote signal.

Jag Wheel Control

The Jag wheel on the side of your HDTV performs all of the same

functions you might see as buttons on other TVs, including volume, power, and channel change. All of these functions have been combined into a single wheel on your M221NV.

∙Press the Jag wheel once to turn your HDTV on.

∙Press and hold the Jag wheel for three seconds to turn your HDTV off.

∙When watching TV, scroll the Jag wheel up and down to turn the volume up and down.

∙To open the Quick Menu, press the Jag wheel for two seconds, scroll the wheel up and down to highlight an option, and then press in the wheel again to confirm your selection. If you do not press anything, the menu will automatically close after 10 seconds.

oVolume—Press to increase or decrease the speaker volume.

oChannel—Press to open a channel list. Choose the channel with the wheel and then press the wheel to go to that channel.

oInput Source—Press to cycle through the various devices connected to your TV (called Inputs). The inputs cycle in the following sequence: TV, AV, Comp (RGB), HDMI-1, HDMI-2, and RGB. After you have stepped through the entire sequence, you will return to the beginning.

oExit—Press to close the Quick Menu.

oPower Off—Press to turn your HDTV off.

Note: The Jag wheel does not operate in the OSD menu. Please use your remote control to change your HDTV settings.

12

www.VIZIO.com