5
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1.From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK.
2.Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK. The Advanced Picture menu is displayed.
3.Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:
•Noise Reduction - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High.
•Color Enhancement - Reduces oversaturation of some colors and improves flesh tones. Select Off, Normal, Rich Color, Green/Flesh, and Green/Blue.
•Adaptive Luma - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, Strong, or Extend.
•Film Mode - Optimizes the picture for watching film. Select Auto or Off.
•Smart Dimming - Select Off or On.
(For M420SV, this menu option is Backlight Control. Select Off, DCR [Dynamic Contrast Ratio], or OPC.)
•Ambient Light Sensor - The ambient light sensor detects the light levels in the room and automatically adjusts the backlight for the best picture. Select On or Off.
4.When you have finished adjusting the Advanced Picture Settings, press the EXIT button on the remote.
M420SV / M470SV / M550SV
Adjusting the Color Temperature
Adjusting the color temperature will change the “warmness” or “coolness” of the white areas of the picture.
To adjust the color temperature:
1.From the Picture Settings Menu, use the Arrow buttons to highlight More, then press OK.
2.Use the Arrow buttons on the remote to highlight Color Temperature, then press OK. The Color Temperature menu is displayed.
3.Use the Arrow buttons on the remote to highlight Color Temperature, then use the Left/Right Arrow buttons to change the color temperature preset:
•Normal is optimized for television viewing.
•Cool produces a
•Computer optimizes the picture for use as a PC monitor.
•Custom allows you to manually change each of the color temperature settings:
Red/Green/Blue Gain - Adjusts the amount of each color in the display.
Red/Green/Blue Offset - Adjusts the position of each color in the display.
4.If you want to reset the color temperatures to the factory default settings, highlight Reset Color Temperature and press OK.
5.When you have finished adjusting the color temperature, press the EXIT button on the remote.
16
