Vizio M502i-B1 user manual Setting UP the Tuner

4

SETTING UP THE TUNER

You can use the TV’s Tuner menu to:

•Select a Tuner Input

•Perform an Auto Channel Scan

•Perform a Partial Channel Scan

•Manually Add Channels

•Select channels to skip

•Select Analog MTS modes

•Select Digital Languages

VIZIO

TUNER

Tuner Mode	Cable
Auto Channel Scan
Partial Channel Scan
Add Analog Channel
Skip Channel
Analog Audio	Stereo
Digital Language	English

Selecting a Tuner Input

Select the type of tuner input you will be using.You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.

1.From the TUNER menu, highlight Tuner Mode and press OK. The TUNER MODE menu displays.

2.Highlight Antenna or Cable and press OK. Press EXIT.

Scanning for Channels

The TV may need to scan for channels before it can display programs and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels from an out-of-the-wall connection (without a cable box). Moving the TV to an area with different channels requires the TV to scan for channels again.

Adding New Channels

Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Scan and Add Analog Channel options. This is quicker than scanning all possible channels.

To add a range of new channels:

1.	From the TUNER menu, highlight Partial Channel Scan, and
	press OK. The PARTIAL CHANNEL SCAN menu is displayed.
2.	Highlight Scan Mode and select the type of channel you
	are adding: Analog, Digital, or Analog/Digital.
3.	Highlight From Channel and enter the channel where
	you want to begin the scan. (Use the Left Arrow button to
	backspace. Use the Number Pad on the remote to enter the
	channel.)

To perform an Auto Channel Scan:

1.From the TUNER menu, highlight Auto Channel Scan, and press OK. The auto channel scan begins.

2.Wait until the channel scan is 100% complete. Highlight Done and press OK.

3.Press the EXIT button on the remote.

If the channel scan is cancelled, the channels that were already discovered are retained. A new channel scan will clear all channels.

VIZIO

CHANNEL SCAN

Channels Found

Digital: 0

Analog: 19

18% Complete

Cancel

Cancel the channel scan.

4.	Highlight To Channel and enter the channel where you want
	to end the scan. (Use the Left Arrow button to backspace.
	Use the Number Pad on the remote to enter the channel.)
5.	Highlight Start and press OK. The partial channel search
	begins.
6.	Wait until the partial channel search is 100% complete.
	Highlight Done and press OK.
7.	Press the EXIT button on the remote.

30