Vizio P283V1 setup guide Verizon FiOS TV P283v1 Big Button Remote Control Manual, Input keys

Verizon FiOS TV

P283v1 Big Button

Remote Control

Manual

Thank you for subscribing to FiOSR TV Service. This User Manual will show you how to program and operate your new FiOSR TV Remote Control (Model P283v1).

Quick Setup Guide

-Verizon FiOS remote

The following steps will guide you to quickly set-up your Verizon FiOS TV remote for your TV.

1.	Turn on your TV and
	the FiOS STB. Make
	sure you can see live
	television.
2.	Locate the 3-digit
	code for your TV
	brand in the list to

and keys together. The RED LED on the remote control will blink twice and then stay on.

5-sec.

4.Enter the 3-digit TV code for your TV brand using the number pad. The RED LED will blink twice and then stay on.

5.Press and release the <CH +> button repeatedly until the TV turns off. You can also “back up” by pressing the <CH ->button.

b. Press <VOL +> and <VOL ->to make sure that the volume keys work.

c.Press and

<Input> keys.

d.If any of these keys do not work as expected, press and hold that key. Release it as soon as it works.

7.If all these keys work, press <OK> to save this TV brand code programming. The RED LED will blink 3 times and then turn off

FiOSR TV Remote Control		8) Troubleshooting
Codes for Major TV Brands		a. If the	button does not
TV Brand	Code	work correctly, make sure
		the TV is on and go back to
AOC	026
		Step 1 of the Quick Start
Audiovox	035	Guide. You can also try the
Coby	070	Code Search Method
Envision	114	below.
Funai	128	b. If the <VOL>, <Mute>, or
Haier	146	<Input> buttons do not work
		correctly, please refer to the
Hitachi	164
		Key Fix Feature.
Insignia	180	c. If you think you made a
JVC	193	mistake with programming
LG	210	your remote, you can always
Magnavox	222	press the <Exit> button and
Mitsubishi	243	start over. The RED LED
Panasonic	279	will turn off if the RC is not
		in programming mode.
Philips	285
		d. If you don’t press any
Pioneer	290	buttons for 60 seconds, the
Polaroid	294	remote control will
Proscan	302	automatically exit
RCA	321	programming mode.
Samsung	331	e. Note, if you press the <CH>
		button many times and the
Sansui	332
		lights on the remote control
Sanyo	333
		all flash rapidly, the
Sceptre	335	programming attempt was
Sharp	342	not successful.
Sony	352	f. If the Brand Search method
Sylvania	371	does not work, please try the
Toshiba	397	Code Search Method below,
		which scans the complete
Viewsonic	418
		database for all TV codes.
Vizio	424	g. If you are still having
Westinghouse	433	problems programming the
Zenith	440	remote, please refer to our
		website at

www.verizon.com/fiostvhelp

will blink each time a new code is sent.

6.When the TV turns off, stop pressing the play button

right away.

•Please note – some TVs may respond slower than others.

7.You can press the <CH +> or <CH -> buttons to go forward or back one TV code at a time.

8.Test that the remote control

is programmed for your TV. a. Turn the TV on using the

key.

b. Press <VOL +> and <VOL -> to make sure that the volume keys work.

c. Press and < Input>. d. If any of these keys do not

work as expected, press and hold that key. Release it as soon as it works.

9.If these keys all work, press <OK> to save this TV brand code programming. The RED LED will blink 3 times and then turn off.

Your Remote Control is now programmed for your TV!

10. Troubleshooting

a. If the button does not work correctly, make sure the TV is on and go back to Step 1 of the Code Search Method.

b. If the <VOL>, <Mute>, or

e. Once you have tried all the TV codes in the remote control, the RED LED and the backlit buttons will flash 4 times rapidly, the RED LED will turn off and the remote will exit the programming mode.

f.If you are still having problems programming the remote, please refer to our website at www.verizon.com/fiostvhelp

OPTIONAL FEATURES <STB Power> Button Turns on TV and STB

Your remote has separate power buttons for the TV and STB. You can program the key to turn on/off both your TV and STB at the same time.

1.Turn both your TV and STB on.

2.Press and hold the <OK>

and buttons together,

then release both.

•The RED LED will blink twice and then stay on.

3. Press 9 – 7 – 7.

• The RED LED will blink twice and remain on.

4. Press .

•The RED LED will blink 3 times and then turn off.

5. Test that the	key
now turns on the TV and
STB at the same time.

4.The RED LED light will blink twice, and remain on.

5.Press .

6.The RED LED will blink 3 times and then turn off.

7.If you want to change it back again so that volume buttons control the TV follow the same steps as above but

press in Step 5.

Key Fix

If your remote control is programmed for your TV, but the <VOL>, <Mute>, or the

<Input > keys do not work correctly, then you can try using the Key Fix feature to fix the buttons.

1. Press and hold the <OK> and buttons simultaneously.

• The RED LED will blink twice and then stay on.

2.Press and hold the key that does not work correctly. The remote control will try a new code every second.

3.Once the TV responds correctly, release the button.

4.Press <OK> to save the current settings and finish programming your remote control.

Reset the Remote Control Original Settings

1. Press and hold the <OK>

2.Your FiOSR TV remote control will only operate your FiOS R TV STB and your TV.

3.The remote will not operate other devices like DVD Player or Audio Receiver.

4.The <TV Power>,<VOL +>, <VOL ->, <Mute> and <Input> buttons will always control your TV.

5.All other keys on the remote control will always control your FiOSR TV STB.

Getting Started

1.	Turn on your TV and the
	STB using the		and
	buttons.
2.	If you have just watched a
	DVD, make sure your TV is
	set to the correct A/V Input
	for your STB.
3.	Press the <CH +>,or <CH ->
	buttons to see the next
	higher or lower channel.
4.	You can go directly to any
	channel by entering the
	channel number on the
	number pad and pressing
	<OK>.
5.	Press	to see a list of
	TV programs.
6.	Press	to return to TV
	watching.
7.	Press the		button to
	launch the FiOSR TV Main
	Menu. From the Main Menu
	you can access all the
	features of your FiOSR TV

3. displays your list of recorded programs if you have DVR service.

4. jumps back 30 seconds in the program you are watching.

5. jumps forward 30 seconds in the program you are watching.

6. records the current program.

7.Buttons , , and will only operate during normal TV watching if you have DVR service.

8.“If the RED LED starts blinking 5 times rapidly when you press the <CH +/->, <VOL +/->, and <OK>, or if the buttons stop lighting up, you should replace the remote control batteries”

Model: RC2834102/01B

For additional information about your FiOSR TV service and your remote, go to

www.verizon.com/fiostvhelp

For video instructions, press the <Menu> key on your remote then select help on the Main Menu

the right and circle

the correct code.

AOC
			026
Shortlist			035
			114
	of brands		070
Brands			146
		Code	128
			164
Magnavox			180
			193
Mitsubishi
			210
Panasonic
			222
Philips
Pion			243

If your TV brand is not listed, codes for additional TV brands are listed at the back of this manual.

3.Once you locate the brand code, press

and hold the <OK>

*Please note – some TVs may respond slower than others. Please allow 1 second between button presses.

6. Test that remote control is programmed for your TV

a. Turn the TV on using the key.

Your Remote Control is now programmed for your TV!

Acronyms

1.RC = Remote Control

2.STB = FiOSR TV Set Top Box

3.VOL = Volume

4. CH+ = Channel Up

5. CH- = Channel Down

Press “ ” and dual designation key together to access secondary key functions

For Widgets press MENU and access via on-screen guide.

Code Search Method to Program the RC

(This method could take up to 15 minutes)

1.Turn on your TV and the FiOS STB.

2.Make sure you can see live television.

3.Press and hold the <OK>

and buttons together,

then release both.

•The RED LED will blink twice and then stay on.

4.Press and hold down the

button.

5.The Remote Control will try a new TV code every second, and the RED LED

< input >buttons do not work correctly, please refer to the Key Fix Feature.

c.If you think you made a mistake with programming your remote, you can always press the <Exit> button and start over. The RED LED will turn off if the RC is not in programming mode.

d.Please Note, the Code Search Method could take up to 15 minutes, as it must go through over 500 codes. The most common codes are tried first, but you may need to press and

hold for a while to locate the correct code.

6. If you want to reset the
remote so that the	key
controls Only the STB,
follow the same steps as
above but press <OK> in
Step 4.

Control TV Volume

Through STB

If the volume control keys don’t work with your TV, you can program the remote so that the STB will control the volume.

1.Press and hold the <OK>

and buttons together, then release both.

2.The RED LED will blink twice and then stay on.

3.Press 9 - 5 – 5.

	and	buttons together,
	and release.
2.	The RED LED will blink
	twice and then stay on.
3.	Press 9 - 0 – 0.
4.	The RED LED will blink 3
	times and then turn off to
	indicate original settings are
	restored.
5.	CAUTION, all previous
	programming in the remote
	control will be lost if you
	follow this procedure.

General Instructions

1.Make sure the remote control has a clear, unobstructed view of the STB and TV.

service.
8. Press <▲> <▼> <►> <◄>
keys to navigate through the
FiOSR TV Menus and Guides.
To select any item, press
<OK>.
9. Press	to return to the
last channel.
10. Press <Info> to see
information about the
current program.
11. Press <Exit> to return to
the previous menu option
or to watch TV.

New and Special Buttons

1. displays a list of movies and other programs you can watch at any time.

2. displays your list of favorite channels.