Vizio VP42 manual Connecting a PC Computer, Preset PC Resolutions

VIZIO VP42 HDTV20A User Manual

2.8 Connecting a PC Computer

1.Turn off the power to the HDTV and PC Computer.

2.Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV.

3.Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV.

4.Turn on the HDTV and PC Computer.

5.Select RGB using the INPUT button on the remote or side of the HDTV, or directly by pressing the RGB button on the Remote Control.

Note:

a)For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1366x768 at 60Hz. Please refer to the pc or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product.

b)A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an electronics store.

2.8.1 Preset PC Resolutions

If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode). Please see the table below for the factory preset resolutions.

	Resolution	Refresh (Hz)	H.Freq (kHz)	V.Freq (Hz)	H.Sync	V.Sync	Pixel Freq (MHz)
	640x480	60	31.5	59.94	N	N	25.175
	640x480	75	37.5	75.00	N	N	31.500
	720x400	70	31.46	70.08	N	P	28.320
	800x600	60	37.9	60.317	P	P	40.000
	800x600	75	46.9	75	P	P	49.500
	800x600	85	53.7	85.06	P	P	56.250
	1024x768	60	48.4	60.01	N	N	65.000
	1024x768	75	60.0	75.03	P	P	78.750
	*1366x768	60	47.7	60.00	P	N	85.500
NOTES: N = Negative, P = Positive, * = Primary (Native) Mode
Version 4/20/2007				25
			www.VIZIO.com