IMPORTANT SAFETY INSTRUCTIONS

Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire.To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.

Unplug the power cord before cleaning your Unit.A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.

When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be located near your Unit and be easily accessible

Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Unit yourself.

Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.

Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock.

Ensure that the power cord and any other cables are unplugged before moving your Unit.

When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.

To reduce risk of electric shock, do not touch the connector with wet hands.

Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.

See the important note and rating located on the back of the unit.

WARNING - This equipment is not waterproof.To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.

CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.

Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of WARNING symbols:

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Page 2
Image 2
Vizio S3820WC0 quick start Important Safety Instructions

S3820WC0 specifications

The Vizio S3820WC0 is a high-performance soundbar that delivers an immersive audio experience suited for various home entertainment setups. This soundbar is designed to significantly enhance the audio quality of your television, bringing movies, music, and gaming to life with dynamic sound.

One of the standout features of the Vizio S3820WC0 is its sleek and modern design. The soundbar is crafted with a brushed metal finish that complements contemporary TV setups, making it an attractive addition to any living room. The compact size allows for easy placement, whether mounted on a wall or positioned on a media console.

Equipped with advanced audio technologies, the S3820WC0 utilizes Dolby Digital technology to provide rich, room-filling sound. Dolby Digital enhances audio clarity and detail across a variety of content, giving users an immersive listening experience. Additionally, Vizio’s integrated DTS Virtual:X creates a lifelike surround sound experience, making it feel as if sound is coming from all directions, which is particularly beneficial when watching action-packed films or playing video games.

The soundbar boasts a powerful 2.1-channel system, which includes a wireless subwoofer for deep bass performance. This subwoofer adds depth to music and sound effects, enhancing the overall audio experience. With a total power output that rivals more expensive sound systems, users can expect clear dialogue and impactful sound for all their media needs.

The S3820WC0 offers seamless connectivity options, including Bluetooth functionality, enabling users to stream music directly from their smartphones or tablets. Furthermore, it includes multiple wired connections, such as optical and auxiliary inputs, providing versatility in connecting various devices.

The soundbar also features Vizio’s Smartcast technology, allowing for easy access to a wide range of streaming services and applications. Users can control the soundbar through the Smartcast app, which enhances functionality by allowing for easy switching between inputs and adjusting sound settings.

In summary, the Vizio S3820WC0 combines cutting-edge audio technologies, stylish design, and versatile connectivity options to elevate your home audio experience. Whether you're watching movies, playing games, or listening to music, this soundbar ensures that every moment is filled with rich, immersive sound.