TECRA A10/S10/M10/SatellitePro S300

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is displayed from which you should select the appropriate communications port for your modem to use.

Dialing PropertiesYou should select this item in order to display the dialing properties.

If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selection.

Connecting the modular cableTo connect the modem’s modular cable, follow the steps as detailed below:

■Connection to any communication line other than an analog phone line could cause a computer system failure.

■Connect the built-in modem only to ordinary analog phone lines.

■Never connect the built-in modem to a digital line (ISDN).

■Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX).

■Never connect the built-in modem to a key telephone system for residences or offices.

■Avoid using your computer modem with the telephone cable connected during an electrical storm. There may be a remote risk of electric shock from lightning.

1.Plug the end of the modular cable into the computer’s modem jack.2.Plug the other end of the modular cable into a telephone jack.

Telephone jack

Modem jack

Modular cable

 

Figure 4-10 Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

User’s Manual

4-33