Vizio TECRA S10 do not, drive supports:, Some CD/DVDs run, correctly, but others, Mode 2, CD-ROMXA Mode, Cannot write correctly, Recordable CD: CD-R, CD-RW

	TECRA A10/S10/M10/SatellitePro S300
Problem	Procedure
Some CD/DVDs run	The software or hardware configuration may be
correctly, but others	causing a problem. Make sure the hardware
do not	configuration matches your software’s needs.
	Check the CD/DVD’s documentation.
	Check the type of CD/DVD you are using. The
	drive supports:
	DVD-ROM: DVD-ROM, DVD-Video
	CD-ROM: CD-DA, CD-Text, Photo CD (single/
	multi-session), CD-ROM Mode 1,
	Mode 2, CD-ROM XA Mode 2
	(Form1, Form2), Enhanced CD
	(CD-EXTRA), Addressing Method 2
	Recordable CD: CD-R, CD-RW
	Check the region code on the DVD. It must
	match that on the DVD-ROM&CD-R/RW drive.
	Region codes are listed in the Optical disc drives
	section in Chapter 2, The Grand Tour.
Cannot write correctly	If you have trouble writing, make sure you are

observing the following precautions:■ Use only media recommended by TOSHIBA.■ Do not use the mouse or keyboard during writing.■ Use only the software supplied with the computer for recording.■ Do not run or start other software during writing.■ Do not jar the computer during writing.

■ Do not connect/disconnect external devices or install/remove internal cards during writing.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

User’s Manual 8-11