Vizio VF550M user manual It. If

VIZIOVF550MUserManual

•If HD content is not available view "Standard Definition" from a digital source.

•Standard, analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that is many times better than old TV so you will see interference and deficiencies you did not know you had.

You cannot see a picture. • Make sure the power button is ON (VlZlO logo glows white).

•Make sure AC power cord is securely connected to the AC socket.

•Press the INPUT button on the remote to select a different input source.

•Check the connections of external devices that may be connected to the HDTV.

•If your HDTV is connected to a computer, press any button on your keyboard to "wake" your computer.

•If you are using an antenna, the signal strength of the channel may be low. Make sure your antenna is connected securely to the TV and move the antenna around the room or close to a window.

You see a distorted picture or hear unusual sound.

The picture has abnormal patterns.

•You may be getting interference from electrical appliances, cars, motorcycles, or fluorescent lights. If you have not mounted it on the wall, try moving your HDTV to another location to see if this is the cause of the problem.

•Check the connections of external devices that may be connected to the HDTV.

•Make sure the specifications of external devices meet the specifications of your HDTV (i.e. resolution).

•If you are using an antenna, the signal strength of the channel may be low. Make sure your antenna is connected securely to the TV and move the antenna around the room or close to a window.

The display image does not cover the entire screen.

You can see a picture but you cannot hear sound.

The TV has pixels (dots) that are always dark or colored.

You see "noise" or "trash" on the screen.

•If you are in RGB mode (Computer), make sure that H-Size and V-Position in the On Screen Display (OSD) are set correctly.

•If you are using TV, AVl, AV2 or Component with 480i input, press WIDE button on the remote control to scroll through various screen modes.

•Press Volume + (Up) on the remote control.

•Press MUTE on the remote to make sure that MUTE is not ON.

•Check your audio settings. The audio may be set to SAP, or the speakers are set to off.

•Make sure that headphones are not connected.

•Check the audio connections of external devices that may be connected to the HDTV.

Your HDTV is manufactured using an extremely high level of precision technology, however, sometimes some pixels of your HDTV may not display. Pixel defects within industry specifications are inherent to this type of product and do not constitute a defective product.

•When your HDTV's digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV's display capabilities. Up- converting can cause noise or trash.

•If you are using an antenna, the signal strength of the channel may be low. Make sure your antenna is connected securely to the TV and move the antenna around the room or close to a window.

You

switch

to a different

input

•

The

TV

remembers

the

volume

level from

the

last

time

you

adjusted

it. If the

and the volume changes.

sound level is higher

or lower from another

source, then the volume

will

change.

You

switch

to a different

input

•

The

TV

remembers

the

viewing

mode from the

last

time

you

used

a

particular

input (AV-1, AV-2, Component, HDMI and TV).

48

www.VlZIO.com