REMOTE CONTROL SENSOR – The Remote Sensor is located at the lower right side of the Sound Bar. This is the window through which all of the remote control signals pass to the sensor. Point the remote control directly at this window for the best response to the remote signal.
HD Sound Bar System Remote Control
The VIZIO Remote Control supplied is designed to be used exclusively with this product. The remote button functions are described below:
1.Power – Use this button to turn HD Sound Bar System ON or OFF.
2.Input – Use this button to select the input desired. Repeated pressing will cycle through Input 1, Input 2 or Optical In.
3.Vol+ – Pressing this button will increase the volume level. Hold for
4.Vol - – Pressing this button will decrease the volume level. Hold for
5.Mute – Pressing this button will either mute or
6.TVOL– Pressing this button will set the sound system to have control over the level of the audio output, preventing commercials on regular programming to become louder than the volume of the program being viewed. Pressing this button will toggle SRS TruVolume ON and OFF.
7.TSHD – Pressing this button will toggle SRS TruSurround HD ON and OFF.
8.Sub+ – Pressing this button will increase the volume output of the Subwoofer relative to the overall system volume.
9.Sub- – Pressing this button will decrease the volume output of the Subwoofer relative to the overall system volume.
Programming a Universal Remote to operate the
HD Sound Bar System
If you own a VIZIO TV with a Universal Remote that uses a
Bar System as follows: | Pictured at right is the VIZIO VUR8P Universal Learning remote. |
Vizio Remote key | HD Sound Bar System |
Power | Power |
Input | Input |
Volume Up | Volume Up |
Volume Down | Volume Down |
Mute | Mute |
Channel Up | Sub Volume Up |
Channel Down | Sub Volume Down |
Menu | SRS TruSurround |
INFO | SRS TruVolume |
Version 1/19/2009 | 9 |
| www.VIZIO.com |
