Vizio VW42L 2.7 Connecting an external Receiver/Amp

VIZIO VW42L HDTV10A User Manual
Version 6/19/2007 23
www.VIZIO.com
2.7 Connecting an external Receiver/Amp
1. Turn off the power to the LCD HDTV
and Receiver/Amp.
2. Using an audio cable (white and red
connectors), connect the cable to the
audio input connectors on the
Receiver/Amp and connect the other
end to the ANALOG OUT (white area)
audio connectors at the rear of the
LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen Display (OSD) menu.
5. Press the on the remote control to select the Audio menu.
6. Press the on the remote control to select SPEAKERS
7. Press the on the remote control to select OFF so that the sound from the LCD HDTV will
now be routed through your Receiver/Amp system.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA input.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.