OPERATIONS

(3) Adjust the volume control of the module of which reception indicator lights.

(2) Set the wireless microphone's power switch to ON. The

(1) Switch the power on.

corresponding module's reception indicator lights. Out

The power indicator lights.

of two reception indicators for antenna A and B, one

 

corresponding to the antenna receiving the strongest

 

radio signal lights.

 

Note on level indicator

 

The level indicator lights depending on the intensity of input into the wireless microphone, regardless of the

volume control setting. When the indicator lights red frequently, your voice can be distorted at a microphone

circuit. In such cases, move your mouth away from the microphone so that the indicator lights yellow at a maximum level. This is not needed if the indicator lights red only occasionally.

If the microphone is equipped with a sensitivity control, adjust the control so that the level indicator lights yellow when spoken loud.

CONNECTIONS

When using with the mixing console, connect the output of WT-870 to XLR-type input connectors of the the mixing console.

Wall-mount dipole

Mobile wireless

Whip wireless

Wall-mount dipole

Mobile wireless

Whip wireless

wireless antenna

antenna

antenna

wireless antenna

antenna

antenna

YW-620

YW-610

YW-600

YW-620

YW-610

YW-600

YW-600 : Direct mount type to the tuner. Requires no antenna cable.

YW-610 : Mobile type antenna. Antenna cable must be under 10m (33 feet) in length.

YW-620 : Fixed mount type antenna having a built-in booster amplifier.

Wireless microphones can be used in wide ranges.

AC IN

E

DC IN Connector

COLD

HOT

Mixer, etc.

– 5 –

Page 5
Image 5
Vizio WT-870 operating instructions Operations, Connections