Vizio WT-870 operating instructions Installation Precautions, Rack Mounting, Cable type

INSTALLATION PRECAUTIONS

Install the tuner, antennas, and antenna cable away from high frequency noise generating

equipment, such as fluorescent lamps and personal computers, whenever possible.

Avoid installing receiving antennas in close proximity to metal stuff, such as steel frames and lockers. Install receiving antennas at least 30cm (1 foot) away from the wall.

The distance between two antennas must be over 3m (10 feet). If both are installed in the same

location, the diversity reception is not effective.

Coaxial cable's high frequency loss increases as frequencies become higher. Keep the connection cable between antenna and tuner as short as possible.

Maximum Antenna Cable Length

Cable type	External diameter	Max. length
		(when YW-620 is used.)
RG-59/U	6.1 mm (0.24")	48m (160ft.)
RG-6U	7.4 mm (0.29")	48~70m (160-230 ft. )

RACK MOUNTING

Optional mounting kit is required for rack mounting. Remove rubber supporters from the equipment.

1. Mounting one unit in a rack. (Optional mounting kits MB-14 and BK-014B are to be used.)

2. Mounting two units in a rack. (Optional mounting kits MB-14 and J-700 are to be used.)

3X16 tapping screw WT-870

WT-870

3X16 tapping screw (Supplied with the MB-14)

Flat head screw (M3X6)		MB-14
	J-700	Fiber washer (Supplied with the MB-14)
included in J-700

Mounting screw (Supplied with the MB-14)

– 6 –