Vizualogic A-1000 owner manual OSD Function Control, DVD Basics

OSD Function Control

OSD MAIN MENU – Press MENU key to enter OSD main menu, then select Item in the menu by continuously hitting MENU key. Use the up and down buttons to change the value.

CONTRAST – Adjust CONTRAST value from 0 -32 (default:16)

BRIGHTNESS – Adjust BRIGHTNESS value from 0-32 (default:16)

COLOR – Adjust COLOR value from 0-32 (default:16)

TINT – Adjust TINT value from 0-32 (default:16)

SHARPNESS – Adjust SHARPNESS value from 0-32 (default:16)

WIDE SCREEN – Changes the image size displayed onscreen from wide, normal, or zoom.

RESET DEFAULT – Resets all OSD adjustment values to default (except screenmode).

DVD Basics

To get the maximum use out of your DVD player, make sure to review this section completely.

REGIONAL CODING

Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. The integrated DVD player has region 1 coding. DVD’s with other regional codes cannot be played in this unit.

TYPES OF DISCS THE INTEGRATED DVD PLAYER WILL PLAY:

•DVD-Video: DVD contains video.

•CD-DA: CD contains musical or audio content only.

•CD-Video: CD contains movie only.

•CD-R/RW: A disc that contains audio files (for example, a CD-R with downloaded MP3 Files), MPEG, or JPEG files.

TYPES OF DISCS THE INTEGRATED DVD PLAYER WILL NOT PLAY:

•Optical disc

•ECD-1, CD-ROM, DVD-ROM

•Mini disc

•ECDG (audio only, not graphics).

LOADING AND PLAYING A DISC

Press the POWER button on either the front of the monitor or the remote to turn the unit on. Push the top of the monitor, releasing the latch, allowing the screen to pivot forward, exposing the DVD player. Insert the disc into the loading slot (with the label side facing towards the rear of the vehicle) until the DVD player fully loads the disc. Return the monitor to the closed position by pushing on the top of the monitor until the latch engages.

Playing Audio CDs

When playing an audio CD, the DISPLAY banner appears automatically. It displays the current track and the amount of the time for that track playing, the total amount of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to display the DISPLAY banner. The options below show you what happens when you press the DISPLAY button.

Press DISPLAY (1x) – ”Single Elapsed” appears along with the current track number playing and the time of that track .

Press DISPLAY (2x) – ”Total Remain” appears along with the current track number playing and the amount of time remaining on the entire CD.

Press DISPLAY (3x) – ”Single Remain” appears along with the current track number playing and the amount of time remaining.

Press DISPLAY (4x) – ”Total Elapsed” appears along with the current track number playing and the total time playing on CD.

10 11