VocoPro Cassette Deck Before Getting Started Things to Consider, Protect Against Power Surges

Before Getting Started: Things to Consider

It is very important to read the following instructions prior to starting any installation procedures. Doing so will ensure a correct installation and may save you some time as well.

Protect Against Power Surges

•Connect all external components before you plug any of their power cords into the ￿ wall outlet.

•Turn off the DUET-II before you connect or disconnect any cables.

•Make sure all cables are properly grounded.

Protect Components from Overheating

•Don’t block ventilation holes. Arrange any components so that air can circulate freely.

•Don’t stack components.

•If you place the DUET-II on a stand, make sure you allow adequate ventilation.

Position Cables Properly to Avoid Audio Interference

•Insert each cable firmly into the designated jack.

•If you place components above the DUET-II, route all cables down the side of the ￿ back of the DUET-II instead of straight down the middle of the back of the DUET-II.

Important Stand and Base Safety Information

Choose the location for your DUET-II carefully. If the DUET-II is placed on a stand or base, ensure that it is of adequate size and strength to prevent it from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the DUET-II.

You should have received the following items:

ITEMS:	QUANTITY:
DUET-II	(1)
SEMI-PRO Microphones	(2)
Microphone Cables	(2)
RCA Patch cable	(1)

POWER

1 2

5