VocoPro Cassette Deck owner manual Front Panel Descriptions, Cassette Controls

Front Panel Descriptions
1. POWER - Press to turn the system ON, press again
and release to turn the system OFF.				13
2. CASSETTE CONTROLS.
RECORD - Press to RECORD. Refer to "Recording		4
Cassettes".
Play – Press to PLAY tape. Refer to "Playing	3			5
Cassettes".
REW/REV – Press to REWIND tape.	POWER
FF/CUE – Press to rapidly ADVANCE tape.	1
STOP/EJECT – Press to STOP cassette. (Cancels
any depressed cassette button except PAUSE).
Press again to OPEN cassette door.	1			2
PAUSE – Press to temporarily PAUSE the tape	2
movement in PLAY or RECORD MODE. Press
and release to start the tape moving again.	6			12
3. GRAPHIC EQUALIZER - Adjust these controls to
provide the sound quality that you prefer. Refer to
"Audio Controls".	11	10	7	8
			9

4.FUNCTION SELECTIONS – Select the INPUT source by sliding knob to choose the desired function. AM – for AM reception.

FM – for FM reception.

TAPE – for cassette operation. CD/CDG – for CD operation.

5.TUNING – Turn the knob to choose the AM or FM station you want.

6. MIC 1 – Connect MICROPHONE for singing.

7.CD/TAPE PITCH – Adjust the TEMPO of music played

from the CD and TAPE decks. TEMPO can be adjusted

10% faster/slower. (Turn clockwise from middle position to increase pitch and counter-clockwise to decrease pitch.)

8.MIC 1-2 VOL– Adjust the VOLUME levels for MIC 1-2 channels separately. Outer control for MIC-1 and inner control for MIC-2. (Turn clockwise to increase volume control and counter-clockwise to decrease.)

9. VOLUME – Adjust the control for desired VOLUME level. (Turn clockwise to increase and counter-clockwise ￿ to decrease.)

10.ECHO – Adjust the control for desired ECHO volume level. (Turn clockwise to increase and counter-clockwise to decrease.)

11.BALANCE – Adjust the control for desired MUSIC and song balance level. (Turn clockwise to increase and counter-clockwise to decrease.)

12.MIC 2 – Connect the MICROPHONE for singing.

13.PLAY/PAUSE – Press and release the PLAY/PAUSE button to start a CD playing from track number 1. The ￿ LCD track indicator will display “1” and the elapsed time indicating that track number 1 is playing. Press ￿ PLAY/PAUSE button to stop for a moment during play, the LCD display “PAUSE”. To resume playing the CD, press the PLAY/PAUSE button again.

7