VocoPro CDG-1020PRO owner manual Controls & Functions, TOP Panel

Models: CDG-1020PRO

1 20
Download 20 pages 27.67 Kb
Page 10
Image 10
Controls & Functions

Controls & Functions

TOP Panel

1.TIME - Switches between three settings:

-Elapsed playing time

-Remaining time in the current song

-Total remaining time of the disc

2.PREVIOUS - Use this button to jump back to a previous track.

3.10+ - Automatically skips ahead 10 tracks.

4.CUE - Press the CUE button to enable CUE MODE.

5.PLAY/PAUSE - Use this button to start playback. Press once to start playback, once again to set the pause mode, and once more to resume playback.

6.REPEAT/SINGLE – Press once to repeat one track and again to repeat all tracks of disc.

7.NEXT - Use this button to skip to the next track.

8.PROGRAM - Press this button to enable PROGRAM mode and set your own playlist.

9.CUE INDICATOR - This LED will indicate if the CUE function is enabled.

10.PLAY INDICATOR - This LED will be lit to indicate when the PLAY mode is enabled.

11.DISPLAY - Displays graphical information about playback settings and disc/song time.

12.FRAME DIAL - When the dial is turned while the CD is paused, the point at which the sound is paused moves by a number of frames corresponding to the number of clicks. Clockwise moves the point forward and counterclockwise moves the point backward.

13.DISC INDICATOR - This LED will be lit to indicate when a disc is in the player and blink when a disc is not in the player.

14.OPEN/CLOSE - Opens and closes the CD disc tray. The tray cannot be opened during playback to prevent accidental interruption.

15.LOOP - Press the LOOP button to set the loop start point, press the LOOP button again to set the loop end point. Press a third time to cancel loop mode and resume normal playback.

16.PITCH BEND (+/- 16%) - The CD speeds up, increasing the pitch while the ( + ) button is pressed. Release the button to return to the original BPM. The CD slows down, decreasing the pitch while the ( - ) button is pressed. Release the button to return to the original BPM.

17.PITCH INDICATOR - This LED will be lit to indicate when PITCH mode is enabled.

18.PITCH ENABLE - Turns the PITCH SLIDER on and off. The PITCH INDICATOR above it indicates whether it is on or off.

19.PITCH SLIDER - Use the slider to adjust the CD pitch. Slide up to decrease the pitch or down to increase the pitch.

10

Page 10
Image 10
VocoPro CDG-1020PRO owner manual Controls & Functions, TOP Panel