Getting connected continued
Connecting TVs/Monitors to the DA-8808VE
The DA-8808VE has three VIDEO OUTPUT jacks which send video and/or decoded CD+G graphics patched from your players to TVs and other video monitor devices. This enables multiple TV configurations for per- formers to enjoy and KJs and VJs to program a set.
1.Connect RCA style video cables from VIDEO OUTPUT jacks 1, 2 and 3 on the DA-8808VE to the VIDEO INPUT jack on your TV or other monitor. You may need to manually switch your TV to video mode, while some models automatically switch when a video signal is detected. On most TVs, the INPUT jack is labeled AUX or VIDEO.
--If the TV does not have a VIDEO IN jack, you may be able to connect the video cable to the VIDEO INPUT of a VCR or DVD player and connect the RF OUTPUT on the VCR or DVD player to the TV ANTENNA INPUT jack.
--If you do not have a VCR or DVD player, you will need to use an RF Modulator to make the adaption between jacks. RF Modulators are easy to find in the electronics section of many stores.
Rear of DA-8808VE
| | | | | | | | | AC 117/230V |
| | | | | | | | | 60/50Hz 200W |
| | | | MIC | | | | | |
| | | | INSERT | | | | 120V 240V | |
| | | ON OFF | | | | | VOLTAGE SELECT | |
REC | MIC | | ECHO | | | | PROFESSIONAL EQUIPMENT | | |
| | | | NO USER SERVICEABLE PARTS INSIDE | | OUTLET |
OUT | OUT | | EFFECT | | | | | |
| | | | | | UNSWITCHED |
| | | | | | | | |
| | | | | | | A | | AC 117/230V |
| | | | | | | | | 50/60Hz |
WIRELESS | CDG | LD | DVD | 1 | 2 | 3 | | | |
| | | | | |
INPUT | VIDEO INPUT | VIDEO OUTPUT | B | | |
| | | | | | | | |
| | | | | | | VARIABLE SPEED FAN | | |
| | | | | | | DO NOT BLOCK | | |
| | | | | | | R SPEAKERS L | |
| | | | | | | A OR B 6 | MIN/SPEAKER | FUSE |
| | | | | | | AC 6.3A 250V |
CD | CDG | LD | DVD | PRE | OUT | IN | A+B 12 | MIN/SPEAKER | |
| AUDIO INPUT | | OUTPUT | EFFECT LOOP | | | |
TV/Monitor | TV/Monitor | TV/Monitor |
