Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers.

Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units.

If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance.

To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units.

To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.

2.1Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.

The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher.

Take care to screw the hose firmly into place with your hands and then complete by tightening about ½ of a turn with pliers. In dishwashers equipped with the ACQUASTOP device, the filters is already fitted inside the threaded ring.

The dishwasher can also be connected to a hot water supply not exceeding 60°C. Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply.

28

Page 4 Page 6
Page 5
Image 5
Smeg DWF614SS, DWF614WH manual Installation and hook-up, Water supply connection, Connecting to the Water Supply
Page 4 Page 6

DWF614SS, DWF614WH specifications

The Smeg DWF614WH and DWF614SS dishwashers are standout models in the world of home appliances, combining elegance with advanced technology. Smeg, known for its stylish Italian design and reliable performance, has created these dishwashers to meet the demands of modern households looking for efficiency without compromising on aesthetics.

The DWF614WH model features a sleek white finish that seamlessly fits into a variety of kitchen decors. In contrast, the DWF614SS offers a contemporary stainless steel look that provides a touch of sophistication. Both models boast a compact design, ideal for smaller kitchens or apartment living, yet they do not sacrifice performance.

These dishwashers come equipped with multiple wash programs, allowing users to choose the most suitable cycle according to their needs. With programs such as Eco, Intensive, and Quick Wash, these dishwashers adapt to various load sizes and types of soiling. The Eco program is particularly noteworthy, designed to save water and energy while delivering excellent cleaning results.

One of the standout technologies in the DWF614 series is the Smeg Vector Wash system, which ensures superior cleaning performance. This system employs high-pressure jets that target stubborn stains and hard-to-reach areas. Additionally, both models feature adjustable racks and foldable tines, providing flexible loading options that can accommodate everything from pots and pans to delicate glassware.

Energy efficiency is a hallmark of the DWF614 series. Both models are designed to minimize resource consumption, earning them high energy ratings. This makes them environmentally friendly choices for families aiming to reduce their carbon footprint.

User convenience is further enhanced through a user-friendly control panel. The interface is intuitive, allowing for easy selection of wash cycles and options. For those who prefer a more automated approach, these dishwashers also feature a delay start option, enabling users to run the machine at the most convenient times.

Noise levels are another important consideration when selecting a dishwasher. The Smeg DWF614WH and DWF614SS operate at a remarkably low noise level, making them suitable for open-plan living spaces where silence is golden.

In summary, the Smeg DWF614WH and DWF614SS dishwashers stand out for their stylish design, advanced washing technology, energy efficiency, and user-friendly features. These models not only elevate the kitchen experience but also ensure that chores like dishwashing are handled with utmost efficiency and sophistication. For anyone in the market for a reliable and elegant dishwasher, the DWF614 series is a noteworthy consideration.
Top Page Image Contents