User instructions
3.3Washing programs
The dishwasher is equipped with a control panel and an INFORMATION DISPLAY (9) from which it is possible to carry out all the power
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without obstruction.
•The dishwasher door is securely closed.
HALF LOAD WASH FUNCTION
This function is recommended for loads of up to 7
By pressing the ½ LOAD WASH (3) button it is possible to select only one basket washing (upper or lower).
After having the program selected, continue as follows:
•by pressing for one time the ½ LOAD WASH (3) button, it will select the upper basket and on the display will compare the following visualization;
•by pressing the ½ LOAD WASH (3) button again the lower basket is selected;
•by pressing a third time the ½ LOAD WASH (3) button it will bring back to the full load washing mode.
N.B.: by selecting the ½ LOAD mode, a modification in the indication of the program duration will set.
One half of the cutlery basket can be placed in the ½ LOAD program basket.
WARNING: do not load dishes and cutlery into the
DELAYING THE PROGRAM
The PROGRAM DELAY button (5) can be pressed to delay the start of the program by up to 12 hours.
This means that the dishwasher can be operated at the time of day of your choice.
The first time the PROGRAM DELAY button (5) is pressed the display will show 12 hours, the maximum delay time before the program will start. Each subsequent time the button is pressed the delay time will be reduced, until the desired delay time is reached.
Particularly, on the display it will have the following indications.
32
