User instructions
Chosen the delay, proceed with the program start, press the button START/PAUSE (6) for same seconds until the clock symbol start to flaash.
The machine will perform a dish
In case you want to put to zero the “delay program” within the running program it is necessary:
•to press the START/STOP (6) button for some seconds until the clock symbol remain lid up on the display;
•to press the DELAY PROGRAM (5) more times until the reset of the delay program (clock symbol shut off);
•to press the START/STOP (6) button to make start the program.
N.B.: It is not possible to select the “delay program” when the program have already began.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
•Always try to run the dishwasher fully loaded.
•Do not wash the dishes in running water.
•Use the washing program that is most appropriate for each type of load.
•Do not carry out any preliminary rinsing.
•If available, connect the dishwasher to a hot water supply up to 60°C.
•When possible, skip the drying cycle by leaving the door open when the washing cycle is complete; the air and the residual heat will dry the dishes perfectly.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the environment. To avoid using excessive amounts of detergent and to save on electricity, observe the following:
•separate the more delicate items from dishes that are more resistant to aggressive detergents and high temperatures;
•do not pour the detergent directly on the dishes.
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.
33
