Rear Panel: Descriptions and Functions
1.MIC (ONLY) OUTPUT jacks - These jacks exclusively supply mixed-microphone MIC-ONLY stereo signals to external devices such as, effects units, additional mixers or other devices. There are two MIC ONLY channels for simultaneous MIC ONLY signal feeds.
2.AUDIO (CDG/DVD) INPUT jacks - These jacks connect the stereo AUDIO OUTPUT signals from SOURCE PLAYERS (i.e. CDG, CD, DVD players) to the DA-900.
3.MUSIC (ONLY) OUTPUT jacks - These jacks exclusively supply a MUSIC-ONLY stereo signal to an external device such as, an effects unit, secondary mixer or other device.
4.LINE OUT jacks - This OUTPUT is for connecting the DA-900 to a secondary mixer or recording device. NOTE: Output from this jack is not affected by the master volume control.
5.PRE-OUT jacks - These jacks are designed for a direct connection to a power amplifier. Output signals from the PRE-OUT jacks are suited for most amplifier inputs.
6.VOLTAGE selector - This is used to set the DA-900's incoming AC POWER setting to either 110V for North American-based power supplies, and 240V for European-based power supplies. NOTE: This selector must be set correctly prior to powering on the DA-900. If this selector is set incorrectly, a fire hazard may arise and the DA-900 may become inoperable, voiding your warranty.
7.AC POWER terminal - This AC terminal is for connecting the supplied AC POWER CORD between the DA-900 and the AC POWER OUTLET.
Rear Panel
| | | 4 | 5 | 6 |
| | | | |
| | | | | CAUTION |
MIC ONLY | INPUT MUSIC | MIXED | | RISK OF SHOCK |
| CDG DVD | ONLY | LINE PRE | | CAUTION: To reduce the risk of electric shock, |
| | | | | do not remove cover (or back). No user- |
| | | | | serviceable parts inside. Only refer servicing to |
| | | | | qualified service personnel. |
OUTPUT | INPUT | OUT | OUTPUT | | |
LAVERNE CALIFORNIA
