VocoPro DVX-580G owner manual Connecting to a TV with a VCR, Connecting to a TV with S-Video

Getting Started

VIDEO OUT VIDEO IN

Connecting to a TV with a VCR

VIDEO

S-VIDEO OPTICAL

You can also use a VCR to connect video to a TV with no RCA video input.You will need an RCA cable and a 75-ohm “coaxial” type cable. Using the RCA video cable,connect one end to the VIDEO OUTPUT jack on the DVX-580G and connect the other end of the cable to the VIDEO INPUT of a VCR.Then,using the 75-ohm “coaxial” type cable, connect one end to the RF OUTPUT of the VCR, and connect the other end to the 75-ohm TV ANTENNA INPUT jack.

FL	FR	SUB	Y	Cb	Cr	VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO	OPTICAL

S-VIDEO IN

Connecting to a TV with S-Video

Using an S-Video cable, connect one end to the DVX-580G’s S-VIDEO OUTPUT jack and connect the other end to the S-VIDEO IN jack on your television.

FL	FR	SUB	Y	Cb	Cr	VIDEO
COMPONENT VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO OPTICAL

Connecting to a TV with Component Video

Using 3 appropriate Component Video cables (usually color coded red,blue and green),connect a set of plugs to the COMPONENT VIDEO OUT jacks (Y Cb Cr) on the DVX-580G and plug the other set of plugs to your COMPONENT VIDEO IN jacks (Y Cb Cr) on your television.

On some TV’s the component video input jacks may be labeled (Y Pb Pr).You will need to press the MODE button on the remote control to toggle between non- interlaced (HDTV) and interlaced (STANDARD) video output.You can only use the MODE button when there is no disc inserted in the disc tray.

12