VocoPro DVX-780K Connecting to a Hdtv or video monitor, Connecting to a Dolby Pro Logic Amplifier

Getting Started

Serial No.

Manufactured under License from Dolby Laboratories

DOLBY PRO LOGIC and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

VGA

trademarks of Dolby Laboratories. Confidential Manufactured under License from Dolby Laboratories

DOLBY PRO LOGIC and the double-D symbol are

OR

HDTV/VIDEO MONITOR

FL	FR	SUB	Y	Cb	Cr	VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO	OPTICAL

Connecting to a HDTV or video monitor

To connect video to a HDTV you can use the same connections as for TV with Component Video OR you can connect directly using the VGA out on the DVX-780K using a HD-15VGA cable. See PREFERENCES, page 19, #5 for instructions on setting VIDEO OUTPUT. You will need to press the V-MODE button on the remote control to toggle between non-interlaced (HDTV) and interlaced (STANDARD) video output. You can only use the V-MODE button when there is no disc inserted in the disc tray. You can also connect directly to a video monitor by using the VGA output on the DVX-780K

FL FR SUB Y Cb Cr VIDEO

SL SR CENTER L R COAXIAL S-VIDEO OPTICAL

Dolby Digital AC-3 Receiver/Decoder

-OR-

Connecting to a Dolby Digital AC-3 Receiver/Decoder

Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable, connect one end to the appropriate jack on the DVX-780K (Coaxial or Optical) and the other end to the appropriate jack on the AC-3 decoder/receiver (Coaxial or Optical). If you have both coaxial and optical inputs on your AC-3 decoder/receiver, it is recommended to use an optical connection as those cables eliminate the possibility of EMI (electromagnetic interference). If your Dolby Digital Receiver does not have a built-in AC-3 decoder, and has 5.1 channel RCA inputs, you can use the 5.1 channel output jacks on the DVX-580G. Either method will provide for AC-3 decoding. Refer to PREFRENCES, page 19, #5 for instructions on setting VIDEO OUTPUT.

DOLBY 5.1 AMPLIFIER

FL	FR	SUB	Y	Cb	Cr	VIDEO
SL	SR	CENTER	L	R	COAXIAL	S-VIDEO	OPTICAL

Connecting to a Dolby Pro Logic Amplifier

Using six RCA patch cables, connect the plugs from one side of the cables to the FL, FR, CENTER, SL, SR and SW outputs on the DVX- 580G.

Connect all the plugs from the other side to the FL, FR, CENTER, SL, SR and SW inputs your Dolby Pro Logic amplifier. Refer to PRE- FRENCES, page 19, #5 for instructions on setting VIDEO OUTPUT.

13