Front Panel Descriptions (CONTINUED)
Front Panel
9 | 10 | 11 | 12 | 13 | 14 |
|
78
7.DSP EFFECT SELECT - Turn this dial to scroll through ECHO, PAN, TRANS, FILTER, FLANGER, REVERB, PITCH or HARMONY and push dial to select one of these effects to apply to an input
8.DSP EFFECT ASSIGN - Push in to apply EFFECT to source music input, and release the button to the extended position to apply EFFECT to a MIC input.
9.X PARAMETER/ EFFECT RANGE - Used to adjust the time parameter of digital effects in either a percentage or in miliseconds.
10.Y PARAMETER/ EFFECT LEVEL - Used to adjust the LEVEL parameter of digital effects in a percentage from 0 to 100%.
11.MUSIC LEVEL - Raises or lowers to overall output of source music from INPUT 1, 2 or 3.
12.INPUT SELECTOR - Correlates to AUDIO IN 1, 2 and 3. Switch this dial to whichever music source you want to apply effects to.
13.HARMONY - For instant access to the HARMONY effect, press this button and the LED will change from red to green to indicate that the effect has been switched ON. The default HARMONY setting is the HIGHER/+100% octave.
14.REVERB - For instant access to the REVERB effect, press this button and the LED will change from red to green to indicate that the effect has been switched ON. Default X PARAMETER is 50% and Y PARAMETER is 20%.
7
