1992 Volvo 240

Anti-theft code

The radio features anti-theft circuitry. If the set is removed from the vehicle or if the batter power is disconnected, a special code must be entered to enable operation of the set.

Refer to the radio code card supplied with your vehicle or ask your dealer for the correct code.

Using the code

After installation or when the set has been disconnected from power, the set displays "cod E" when it is switched on.

Enter the 4-digit code using the preset buttons. If the correct code is entered, "codE" is no longer displayed and the set is ready to use.

Incorrect code

If an incorrect code has been entered "EEE" is displayed for 1 second and the "cod E". Enter the correct code.

After three unsuccessful coding attempts the set locks for 2 hours. The unit must be connected and turned on during this time. Enter the correct code again once the time has elapsed.

pg. 27 Radio

file:///K/ownersdocs/1992/1992_240/92240_025.htm (2 of 9)12/30/2006 9:31:24 AM

Page 33
Image 33
Volvo 1992 240 owner manual Pg Radio