1992 Volvo 240
1 Unscrew and remove tail lamp inside cover. Note that inside cover is hooked at the upper edge. Lift the lower end out/up and unhook upper edge.
2 Turn bulb holder approx 3/8" (1 cm) counterclockwise and remove it.
3 Depress bulb in bulb holder, turn it slightly counterclockwise, and remove it.
4 Install a new bulb. Install bulb holder in tail lamp.
NOTE: One of the bulb holder tabs is wider and fits only in corresponding recess.
Turn bulb holder clockwise. Check that bulb lights. Replace tail lamp inside cover.
|
| Power |
|
| ||
Bulbs | CP | W | Socket | US Bulb | ||
No | ||||||
|
|
|
|
| ||
1 | Rear fog light | 32 | 21 | Ba 15s | 1156 | |
(Driver side only) | ||||||
|
|
|
| |||
2 | 32 | 21 | Ba 15s | 1156 | ||
3 | Rear turn signal | 32 | 21 | Ba 15s | 1156 | |
4 | Tail light | 4 | 5 | Ba 15s | 67 | |
5 | Reflector | – | – | – | – | |
6 | Brake light/tail | 32/3 21/5 | BaY | 1157 | ||
light* | 15d | |||||
*Right side lamp holders are white. Left side lamp holders are black.
file:///K/ownersdocs/1992/1992_240/92240_088.htm (3 of 10)12/30/2006 9:31:34 AM
