Filter Replacement
6.Replace Front Panel by positioning the Panel slightly above the unit and aligning the tabs of the Front Panel with the holes in the unit (A). Gently press the Front Panel down, sliding into the tab slots and allowing the magnets to se- curely lock the Front Panel in place.
± | A |
± | |
|
±
Safety Shut-Off Feature
For your protection, the unit is designed to operate only if the Front Panel is in place. Do not attempt to override this safety feature. If, after the Front Panel has been reinstalled, the unit does not operate, remove and reinstall the Front Panel to as- sure proper placement.
7.To reset the Replace Filter notification - press and hold the REPLACE CARBON or REPLACE HEPA button, depending on which Filter was replaced, for at least 3 seconds. The light will turn off confirming the indicator is reset.
µ |
|
|
|
|
|
|
|
|
|
| µ |
|
|
|
|
|
|
|
|
|
| ||
Press for |
|
|
|
|
|
|
|
|
| Press for | |
3 seconds. |
|
|
|
|
|
|
|
| 3 seconds. |
Note: Do not operate the Air Purifier without Vornado Carbon and Vornado HEPA Filters in place.
Storage
Follow the steps listed below when you are ready to store your unit.
1.Unplug power cord and bundle loosely.
2.Lift unit with both hands, using hand holds. (Refer to USER TIPS on page 13)
3.Cover, or place back in retail carton if available. This will prevent the unit from accumulating dust overtime.
4.Store unit in a cool and dry location.
16English