9.Battery Recharge:
1) To charge the batteries, please connect the plug of the AC adapter to DC 5V jack of
the main unit. When the Power LED indicator goes off , it indicates that the batteries are fully charged.
2)Please use only the FUJIFILM
3)For additional battery packs, please contact your dealer or you can purchase
it at Digital Camera Stores.
10.If an erroneous display /operation occurs :
1)When the device error message pop on screen , there
may be a chance of corrupt data or the memory card is damaged , you can change another memory card .
2) If any shut dowm caused by erroneous operation , you can depress the [ reset] button located on the back to switch off the main unit .
3)If the unit operated via USB on to PC while the batteries are low, erroneous display /operation may occur, if this happens ,unplug the USB cable, and press the [ reset] button .
11.Care for the Hard Drive and unit :
1)To keep your hard drive in better operating performance , we recommend to periodically run Scan Disk and Disk Defragmenter .
2)Hard Drive must be formatted to the FAT or
3)Please carefully insert and remove the memory card from each slot .
4)Do not drop, jar , bump , shock the unit , or expose to severe vibration
while data is being transmitted .
5)To reduce the risk of electronic shock , do not remove cover (or back )
6)To reduce the risk of fire or shock hazard, do not expose this equipment to rain ,any liquid or moisture.
7)Keep it plugged into the AC adapter/charge while connected to your computer .
