VTech CS6124-2 user manual Key tone, Set date and time, To change the setting, CID or

Telephone settings

Key tone

You can turn the key tone on or off.

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays Key tone, then press MENU/SELECT.

4.Press CID or to choose On or Off, then press MENU/SELECT to confirm your selection. You hear a confirmation tone.

Set date and time

Settings

Key tone

On

The answering system announces the date and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information.

To change the setting:

1. Press MENU/SELECT when the handset is not in use.

2. Press CID or until the screen displays Settings, Settings then press MENU/SELECT.

3.	Press CID or	until the screen displays
	Set date/time, then press MENU/SELECT.
4.	When the month is flashing, press			CID or	until the
							Set date/time
	screen displays the correct month and then press
	MENU/SELECT; or, press the dialing keys (0-9) to enter the
	current month (for example, if the month is March, you
	must enter 03).
5.	Repeat step 4 to set the correct date and year and then					Date: 03/25/10
	press MENU/SELECT to advance to time setting.
6.	When the hour is flashing, press			CID or	until the
	screen displays the correct hour and then press
	MENU/SELECT; or, press the dialing keys (0-9) to enter the
						Time: 02:35 PM
	current hour (for example, if the time is two o’clock, you
	must enter 02).
7.	Repeat step 6 to set the correct minute. When AM or PM
	is flashing, press	CID or	to select AM or PM. Press

MENU/SELECT to save your settings. You hear a confirmation tone.

• If the date and time are not set when a message is recorded, the system announces, “Time and date not set,” before each message plays.

•When there is a power failure or after battery replacement, the date and time need to be reset.