Telephone operation
Multiple handset use (for models CS6120-2 and CS6124-2 only)
You can use both handsets at the same time on an outside call.
To share an outside call:
•When a handset is already on a call and you would like to join the call, press
/FLASH on the other handset to join the call.
•To end the call, press OFF/CANCEL or place the handset in the telephone base or charger.
The call continues until all handsets hang up.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory, call log or redial while you are on a call. Chain dialing can be useful if you wish to access other numbers (such as bank account numbers or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
1.Press MENU/SELECT twice to select 
Directory.
2.Press 
CID or 
to scroll to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
1.Press MENU/SELECT and then press 
CID or 
to select 
Call log.
2.Press MENU/SELECT and then press 
CID or 
to scroll to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
1.Press REDIAL/PAUSE.
2.Press 
CID, 
or REDIAL/PAUSE repeatedly to browse to the desired entry.
3.Press MENU/SELECT to dial the displayed number.
• You cannot edit a directory entry while on a call. For more details about the directory, see page 14.
•You cannot copy a call log entry into the directory while on a call. For more details about the call log, see page 18.
•You cannot erase a redial entry while on a call. For more details about the redial memory, see page 14.
•Press OFF/CANCEL to exit the directory, call log or redial list when you are on a call.
13
