VTech CS6124-2 user manual Telephone base and charger installation, Wall mounting optional

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and telephone wall jack. Contact your DSL service provider for more information about DSL filter.

Telephone wall jack

A DSL filter (not included) is required if you have DSL high-speed Internet service

Telephone line cord

Electrical outlet

(not controlled by a wall switch)

Telephone base power adapter

Telephone base

Charger adapter

Charger

• Use only the power adapters supplied with this product.

• The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Wall mounting (optional)

Your telephone comes ready for tabletop use.

To mount your telephone on the wall:

1.Position the top hole at the back of the telephone base against the top mounting stud [A].

2.Slide the telephone base down on the mounting studs [A] and [B] until it locks into place.

Mounting studs

[A]

[B]

Telephone base