VTech CS6419-2 user manual Telephone base and charger installation

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. Contact your DSL service provider for more information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Tabletop to wall mount installation on page 5 for details.

Telephone base power adapter

Electrical outlet not controlled by a wall switch

Telephone
wall jack	Charger adapter
	If you have DSL high
	speed Internet service,
	a DSL filter (not
	included) is required.

Electrical outlet not controlled by a wall switch

Telephone line cord

Telephone base Charger

•Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call

1(800) 595-9511. In Canada, go to www.vtechcanada.com or dial

1(800) 267-7377.

•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.