Basic Operation

Base Menu Soft Functions

Base Settings

To access Base Settings, with the Base in the idle (OFF) mode, press MENU, scroll down to BASE SETTINGS, then press OK. You can now access the following setting options:

RINGER VOLUME

RINGER MELODY

KEYPAD TONE

TONE/PULSE

CONTRAST

LANGUAGE

Press CLEAR at any time to back out of the Base Settings mode.

Ringer Volume

To adjust the Base Unit ringer volume:

Press MENU. Scroll down to BASE

SETTINGS, then press OK. RINGER VOLUME will be highlighted, press OK. You will see a graph on the Base display indicating the current volume setting.

Press the softkey to lower the ringer volume. At the lowest setting (graph is completely clear), the Base will not ring when a call comes in.

Press the softkey to raise the volume. At the loudest setting, the graph is completely shaded in.Press OK to confirm your setting.

Ringer Melody

There are eight Base ringer melody choices. To change the melody:

Press MENU. Scroll down to BASE SETTINGS, press OK. Scroll down to RINGER MELODY.

Press OK. Use either scroll key to sample the melodies.

Press OK to confirm your selection.

32

Page 32
Image 32
VTech i 5803 operating instructions Base Settings, Ringer Volume, Ringer Melody