Handset and Base Operation

NATURAL - No frequency enhancement (Your Handset is preset to this selection).

The Handset will graphically display the four modes.

NOTE: The Sound Select feature cannot be used when

in Speakerphone or Headset mode.

Mute Function

During an active call pressing either the MUTE softkey on the Handset or the MUTE button on the Base (when in Speakerphone mode), will disable the microphone. Press MUTE again to return to normal two-way conversation.

Hold Function

1

1

 

 

Natural Audio

HOLD 12:30PM

MUTE

HOLD 12:30PM MUTE

ON

OK

OFF

1

2

Advanced Operations

From the Handset:

Press the HOLD softkey to place a call on hold. To return to the call, press the ON (or SPEAKERPHONE) key.

NOTE: The Handset will display CALL ON HOLD when a call is placed on hold. If you have new calls in call log, CALL ON HOLD will display alternately. An H will be displayed to remind you a call is on hold. If a call remains on Hold for 5 minutes, your i 5857 Handset will ring to remind you the call is being held. The phone will display Call On Hold Ring Back! You have 30 seconds to return to the call before it is dropped.

From the Base:

During an active call, press the HOLD softkey to place a call on hold. The SPEAKERPHONE LED will flash to indicate a call is on hold.

To return to the call, press SPEAKERPHONE.

NOTE: Base will display CALL ON HOLD when a call is placed on hold. If a call remains on hold for 5 minutes, your i 5857 Base will ring to remind you the call is being held. The phone will display CALL ON HOLD RING BACK! You have 30 seconds to return to the call before it is dropped.

HOLD

12:30PM

MUTE

ON

OK

OFF

 

1

2

 

XFER

HOLD

MUTE

Flash Function

You can use your i 5857 with services such as Call Waiting. Simply press the ON/FLASH key on the Handset or the FLASH key on the Base (when in speakerphone mode) to flash the line.

40

Page 40
Image 40
VTech i 5803 operating instructions Hold Function, Flash Function, From the Handset, From the Base