VTech i 5808 important safety instructions Headset Operation, Belt Clip

Models: i 5808

1 59
Download 59 pages 21.4 Kb
Page 43
Image 43

Headset Operation

Your i 5871 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for hands-free operation. If you choose to use the headset option, you must obtain an optional accessory headset, which is compatible with the i 5871. For best results, use a VTech 2.5mm headset.

To purchase a headset, visit us on the web at www.vtechphones.com or call VTech Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm headset, locate the headset jack on the i 5871 handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless handset. The plug should fit securely. Do not force the connection.

NOTE:

Whenever a compatible headset is connected to the cordless handset, the microphone on the handset will be muted. This is done to limit the effect of background noise.

Many compatible headsets have a reversible, monaural design. This means you can wear your headset on either ear, leaving one ear free for other conversations.

Belt Clip

The i 5871 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the handset. The belt clip should snap securely into place. Do not force the connection.

43

Additional Information

Page 43
Image 43
VTech i 5808 important safety instructions Headset Operation, Belt Clip