Telephone Operation
Temporary Tone Dialing
If you have pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing * TONE. This is useful if you need to send touch tone signals for access to telephone banking or long distance services.
1.Dial the number.
2.Press * TONE. Buttons pressed after this send touch tone signals.
3.When you end the call by pressing OFF, the phone automatically returns to pulse service.
Headset Jack
You can use this telephone handsfree when you install any VTech 2.5 mm headset, purchased separately.
Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.
•Temporary tone dial mode is use- ful if you need to send touch tone signals for access to telephone bank- ing or long distance services.
•To purchase a headset, visit us on the web at www. vtechphones.com or call VTech Cus- tomer Service at
In Canada, contact VTech Telecommu- nications Canada Ltd. at www.vtech- canada.com or 1-
Basic Operation
www.vtechphones.com | BASIC OPERATION 13 |
