Speed Dial
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) into the speed dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory for instruc- tions.
Store a Number/Name in Speed Dial
1.Press PROG on the handset.
2.Press 
or 
until the screen displays SPEED DIAL.
3.Press SELECT. The screen displays ENTER
4.Press the key (1 through 9) for the memory location where you want to store this entry. The screen displays ENTER NAME.
5.Using the chart below, enter up to 15 characters for the name you’re storing with the number. Use 
to backspace and make corrections; use 
to advance and add a space.
|
|
| Presses |
|
|
|
Dial Key | Once | Twice | 3 Times | 4 Times | 5 Times | 6 Times |
1 | 1 |
|
|
|
|
|
2 | A | B | C | 2 |
|
|
3 | D | E | F | 3 |
|
|
4 | G | H | I | 4 |
|
|
5 | J | K | L | 5 |
|
|
6 | M | N | O | 6 |
|
|
7 | P | Q | R | S | 7 |
|
8 | T | U | V | 8 |
|
|
9 | W | X | Y | Z | 9 |
|
0 | 0 |
|
|
|
|
|
* | * |
|
|
|
|
|
# | & | ‘ | , | - | . | # |
•The entries you stored in speed dial memory will be marked with 01 through 09 in the telephone directory.
•Press OFF at any time to exit speed dial mode.
•When memory is full the screen displays MEMORY
FULL, an error tone sounds, and you cannot store a new number until you delete a record in speed dial memory or the directory.
•If the location is not empty, your new entry will be stored in place of the old and the first entry will be deleted. Take caution to not save over entries you do not wish to delete from memory.
Basic Operation
www.vtechphones.com | BASIC OPERATION 17 |
