VTech IP 5825 important safety instructions Getting Started Wall Mounting

Getting Started

Wall Mounting

The Wall Mount brackets are designed for use on standard wall mount plates only. Wall mounting is optional.

1.Plug the AC adapters into an electrical outlet, and the DC connector to the bottom of the Base Unit.

2.Connect the telephone line cord to the jack at the bottom of the Base Unit, and the other end to the wall jack.

3.Line up the tabs on the wall mount adapters with the holes at the bottom of the Base Unit/back of the Handset Charger. Snap the wall mount bracket firmly in place.

4.Mount the Base Unit/Handset Charger on the wall. Position the Base Unit/ Handset Charger so the mounting studs will fit into the holes on the wall mount bracket. Slide Base Unit/Handset Charger down on the mounting studs until it locks into place.

02- -EW780 ID: FCC HAC

com.vtechphones. 9511-595-800-1 Service Customer ONLY SOURCE POWER 2 CLASS 600mA 9V DC .LTD TELECOMMUNICATIONS VTECH

TELEPHONE CORDLESS

10