VTech IP 5825 Basic Operation Handset Operation, Making Calls, Flash Function, Redial Funtion

Basic Operation

Handset Operation

Making Calls

•Press ON (or, SPEAKER to use the Handset Speakerphone feature). Dial the phone number.

-OR-

• Dial the phone number first; then press ON (or SPEAKER).

• Press OFF to end your call.

Answering Calls

•Press any key except OFF, INT, MUTE, REDIAL/

PAUSE and the softkeys.

• Press OFF to end your call.

How to Adjust the Handset Volume (also applies to the Handset Speakerphone and Headset)

• The volume control is on the left edge of the Hand- set. During a call, press or key to adjust the listening volume to a comfortable level. When you reach the maximum or minimum setting, a double- beep will sound.

NOTE: The procedure is the same for the Handset earpiece, Speakerphone and Headset.

Flash Function

•You can use your ip 5825 with services such as Call Waiting. When you receive a call-waiting sig- nal, simply press the ON/FLASH key to switch to the new call. Press ON/FLASH again to switch back to the original call.

NOTE: Use ON/FLASH to access other phone company subscriber services, as described by your provider.

Redial Funtion

•Press REDIAL/PAUSE to display the last tele- phone number dialed from the Handset (up to 32

digits). Use or to scroll through the 5 previ- ously dialed numbers. When the beginning or the end of the redial list is reached, a double- beep will sound.

•When the desired number is reached, press ON or SPEAKER to dial.

•Pressing OFF will exit the redial review list.

NOTE: When the redial memory is empty, and REDIAL is pressed, a double- beep will sound.

•When the desired entry displays, press DELETE to delete it. A confirmation tone will sound.

12