4
Doorbell location testing
Before mounting the doorbell on a wall, make sure you test if the location you install the doorbell is in range, and adjust the camera angle to best suit your needs.
You may unplug the AC power first so that you can move around
more conveniently to make the tests.
To test the location for installation:
Hold the doorbell in the location where you want to install the doorbell, then follow the steps below to test the reception range and video capture angle.
1.Press MENU >> Press q or p to Settings >> Press SELECT.
2.Press q or p to Doorbell setup >> Press SELECT.
3.Press /DOORBELL to check the video streaming quality. Press ISO, then press + or - to adjust the video streaming brightness.
• If audio feedback occurs, press on the handset to turn off the speakerphone.
•If the desired location is in good range, the handset displays .
•If the desired location is not in good range, the handset flashes in red. Press INFO for instructions to relocate your handset and/or telephone base. When the reception is in good range, the handset displays . Press OK to return to the video streaming.
4.Keep the video streaming on for camera lens adjustment.
When you check for the desirable location to install the doorbell:
•Make sure the visitor is standing in a reasonable distance away from the doorbell.
Shooting area
50 degrees
18
inches
|
|
| 20 |
|
|
| inches |
63 inches |
|
| |
|
|
|
•Avoid mounting it to where it is exposed to direct sunlight.
•Avoid mounting it to where reflections may be caused by sunlight, for example, opposite to a white wall.
•Avoid placing other cordless devices near the doorbell. They may cause interference.