Whirlpool ET19TK manual Install Properly Remove sales labels, Clean it, Plug it

Install	properly..	.	Remove sales labels.. .
			Remove the Consumer Buy Guide label and other
			inside labels before using the refrigerator. Any glue
			left can be taken off with rubbing alcohol.
			Do not remove	the Tech Sheet fastened	under
			the refrigerator	at the front.

Clean it.. .

1.Allow 1%inch (1.3 cm] between overhead cabinets and the refrigerator top.

2.Allow ‘~2inch (1.3 cm) clearance against cabinets on each side for ease of installation.

3.If the refrigerator is to be against a wall, you might want to leave enough space so the door can be opened wider.

Level refrigerator-freezer.. . Levelingscrew

Clean your refrigerator before using it. See clean- ing instructions on page 8,

Plug it in...

Right to Raise;

Left to Lower

I. Remove base grille [see page 8).

2.To raise front, turn each screw to the right.

3.To lower front, turn each screw to the left.

4.Check with level.

Refrigerator

Power Cord

RECOMMENDED GROUNDING METHOD

A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided.

Do not use an extension cord. Use a receptacle which cannot be turned off with a switch or pull chain. See individual electrical requirements and

grounding instruction sheet in your literature package.