Installation
IS9181 installation
To install the IS9181:
Plug the IS9181 power adapter into the power port labeled DC 14V on the back of the IS9181, and plug the other end into an electrical outlet not controlled by a wall switch.
A progress bar appears on the screen while booting up. It may take up to three minutes to complete this process.
Electrical outlet not controlled by a wall switch
When the IS9181 is finished booting up for the first time, Press STANDBY to advance to device setup appears on the screen.
1.Press STANDBY and the initial setup screen appears (shown to the right).
2.Press SELECT and follow the setup screen instructions.
Press STANDBY to advance to device setup
Set up IS9181 system
Steps:
1.Connect to a Wireless Network
2.Adjust the Clock
3.Enter location for Weather
Continue Setup ?
YESNO
Power adapter
For instructions on setting the Wireless network, see page 15.
For instructions on setting the Clock, see page 17.
For instructions on setting the Weather settings, see page 19.