•The handset battery will charge if you place the handset in the telephone base with either the front or back facing out to show off the insert as shown in Figure 6.
Getting started
10.If you wish to add an image to the transparent image cover, go to Install an image on page 5.
11.Replace the transparent image cover by placing it flat against the handset and sliding it towards the
CHARGE light until it clicks into place as shown in Figure 5.
12.Charge the handset by placing it in the telephone base. The handset charge light will be on when correctly placed in the telephone base.
Caution:
If the charge light does not come on, remove the handset from the telephone base and make sure that the transparent image cover is on correctly. The cover must click into place to be seated properly.
After installing the battery, you might be able to make and receive short calls. For best performance, charge the handset for at least 16 hours before use. When the battery power is low, the handset will beep; LOW BATTERY will be displayed and will flash on the handset screen. Place the handset in the telephone base to charge the battery when not in use. See the table on page 33 for battery operating times.
Figure 5:
Replace transparent image cover
CHARGE light
OR
Figure 6: Handset charging positions
www.vtechphones.com