Calls Log (Caller ID - Call Waiting)
• Press SEL. Use | or | to scroll through the |
call log entries. |
|
|
•When the beginning or the end of the call log is
reached, you’ll hear a double beep.
NOTE: The NEW icon in the left down corner indicates the call is not yet reviewed.
Storing a Caller ID
•Follow the steps in Reviewing Caller ID to scroll to the record to be stored.
•To change the format of the number you wish to store in memory, press the # key repeatedly. The handset will cycle through the alternate dialing options (1 + area code + number, area code + number, 1+ number, or number only). Press SEL to store the displayed number.
• You’ll hear a confirmation tone and the screen will display:
•If the CID isn't able to detect a name, EDIT NAME will be prompted. If unable to detect the number, EDIT NUMBER will be prompted. You will then need to enter the name and/or the number.
• If both name and number are missing, for example as in a private listing, the request will be rejected with the message:
•If the phone number already exists in the
phonebook, the entry will not be stored, and the screen will show:
•If the phonebook is full, the screen will show:
Dialing from Caller ID
•Follow the steps in Reviewing Caller ID to scroll to the entry to be dialed.
•To change the number before calling, press #
repeatedly to see the dialing options (1 + area code + phone number; area code + phone number; 1 + phone number; number only) then press PHONE (or SPK) to dial the number.
Basic Operation
18
