BASIC OPERATIONS
|
|
| AREA CODE PROGRAMMING |
| |
|
|
| To benefit from all the Caller ID features of your | ||
| SELECT |
| telephone, you must enter your home area code. | ||
LINE 1 | OFF | LINE 2 | If you live in an area where you dial calls within your | ||
|
|
| |||
|
|
| own area code by dialing 7 digits (no area code), | ||
1 | 2ABC | 3DEF | follow these steps (with the Handset OFF ): |
| |
4GHI | 5 JKL | 6MNO | 1. Press PROG. |
| |
2. Press | until AREA is blinking. |
| |||
|
|
|
| ||
7PQRS | 8TUV | 9WXYZ | 3. Press SELECT. |
| |
|
|
| 4. HOME should be blinking. If not, press | until it | |
TONE | 0OPER |
| blinks. |
|
|
5.Press SELECT. ENTER AREA CODE is dis-
HOLD PROG FLASH REDIAL/PAUSE
|
| played. |
CONF | INTERCOM | 6. Enter your own home area code. |
7.Press SELECT.
ALTERNATE METHOD
If you live in an area where all local calls require 10 digits (area code plus phone number, without dialing “1” first:)
1.Press PROG.
2.Press 
until AREA is blinking.
3.Press SELECT.
4.HOME should be blinking. If not, press 
until it blinks.
5.Press SELECT. ENTER AREA CODE is displayed.
6.Enter 000.
7.Press SELECT and continue below.
You may program up to 5 local area codes. An area code is “local” if you do not dial “ 1” when you make calls to that area code. In other words, you make calls to “local” area codes by dialing 10 digits (area code plus phone number) without a preceding “1”. This might include your own area code.
BASIC OPERATIONS
1.Press PROG.
2.Press 
until AREA is blinking.
3.Press SELECT.
4.Press 
until LOCAL is blinking. Press SELECT.
5.Press 
until the desired location is blinking (#1…..#5) .
6.Press SELECT . ENTER AREA CODE is displayed.
7.Enter a “local” area code.
8.Press SELECT.
9.Press OFF when finished.
DIRECTORY AREA RINGER KEYBEEPS
NOTE: To replace or edit an existing area code, use the 
key to delete the existing digits, and enter the desired area code. Press SELECT when done.
11
