ADVANCED OPERATIONS
CALLER ID
This telephone provides two types of Caller ID on both the Handset and Base Unit:
Caller ID: Displays the name and number of each caller after the phone begins ringing (requires Caller ID service from your telephone company).
Caller ID on Call Waiting: Shows the name and number of each caller on Call Waiting after you hear the Call Waiting tone (requires Caller ID on Call Waiting service).
A NEW CALL light will flash on the Base Unit to alert you to new CID records. Once the new caller ID records have been reviewed on the Handset, the NEW CALL light will go out.
The phone has a Call Log, which stores the name, number, date, and time of the last 50 calls received. You can review the Call Log to see who called while you were out. You can
NOTE: Caller ID and Call Waiting Caller ID are subscription services, available through most local phone service providers. You must subscribe to these services to benefit from the Caller ID features of this phone. Contact your local phone company for details.
REVIEWING THE CALL LOG
With the Handset OFF:
1.Press 
or 
. You will see the number of NEW (not viewed) and OLD (previously viewed) calls.
2.Continue to press 
or 
to review the callers.
Some locations are not equipped to send Caller ID information when a person places a call. When you receive calls from such locations, your phone will display UNAVAILABLE.
If a caller purposely blocks their phone number from being delivered by Caller ID, your phone will display PRIVATE.
HINT: If a 
appears in the upper right corner, it indicates the party has called more than once.
ERASING CALLS
To erase a call; with the Handset OFF:
• | Press | or | until you see the call you want to erase. |
• | Press SELECT. |
| |
• | Press | until ERASE is blinking. Press SELECT. | |
• | Press | until YES is blinking. Then press SELECT. | |
To erase your entire Call Log; after you have viewed all calls and the handset is off:
•Press 
or 
until you see any call in the log.
•Press SELECT.
•Press 
until ERASE is blinking. Press SELECT.
• | Press | until ALL is blinking. |
| Then | press SELECT. The handset displays: |
• | Press | until YES is blinking.Then press SELECT. |
16
