3.3Adjustment Procedure Cont.

The Geometry Menu

OSD Agent

Description

 

 

 

Adjusts Picture Size and Position Controls. The four “Edge”

 

controls shift each edge within available limits. Note that the

Edge Adjustment

maximum available shift depends on the incoming video standard

and the display panel type, and may be restricted vertically. This

 

 

provides very flexible and easy to use image size an position

 

control.

 

 

Moire

Corrects Moire. Choose from one of four correction tables.

 

 

 

Sets the total number of input pixels per line to correspond with the

Clock

input source, and will normally require adjustment for unusual

 

signals.

 

 

 

Adjusts the internal clock to sample each pixel as near as possible

Phase

to the centre. Phase will normally require adjustment for unusual

 

types of signal.

 

 

 

Selects the displayed aspect ratio where the signal input is at

 

variance with the display panel’s natural aspect ratio. The format

Aspect Ratio

may be adjusted to either “Letter Box” or “Overscan”. “Letter Box”

effectively adjusts the height of the displayed image and “Overscan”

 

effectively adjusted the width to achieve the desired 4:3 aspect

 

ratio.

 

 

Input Select: Configures the preferred input selections.

(If a facility is not fitted, it will be displayed but not selectable.)

OSD Agent

Description

 

 

 

Signal Type Priority

Video-graphics or Graphics-video

 

 

 

 

 

CVBS -Y/C - SDI - Component

Video Priority Search

Y/C - CVBS - SDI - Component

Order

SDI - Component - CVBS - Y/C

 

 

Component - SDI - CVBS - Y/C

 

 

Graphics Search

RGB-DVI or DVI-RGB Note: DVI not available

 

 

Component Video Type

RCB or YUV. Incorrect colors may be due to wrong selection here.

 

 

 

The Color Menu

 

 

 

 

OSD Agent

Description

 

 

 

Adjusts the contrast (video gain) and brightness (black level)

Video Inputs

parameters, also color saturation for PAL, NTSC and SECAM

inputs can be accessed from this menu. For NTSC signals, there is

 

 

an additional HUE option.

 

 

Computer Inputs-

Red, green and blue levels can be thought of as individual

brightness controls for each of red, green and blue. They should be

Individual Color

adjusted for the desired color balance and to minimize noise on low

Adjustments

intensity colors and greys. Color tints can be added as required.

 

 

 

 

8

Page 10
Image 10
VTech VT181CHE-IR, VT181CH-IR manual Adjustment Procedure, Geometry Menu, Color Menu