3.3Adjustment Procedure Cont.
The System Menu: Contains functions which are more applicable to system operation than to picture adjustment.
| OSD Agent | Description |
|
|
| |||
|
|
|
| |||||
| Esc | Returns to the last saved setup. It is useful if an adjustment has | ||||||
| been made in error. |
|
|
| ||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| Saves all the user adjustments for the displayed signal type. The | ||||||
| Save | new adjustments are stored in | ||||||
|
| valid from a power |
| |||||
|
| 1) Restores the user adjustable parameters for the signal currently | ||||||
|
| being display back to the factory defaults. | ||||||
| Reset | 2) Press the |
|
|
|
| buttons simultaneously to restore to | |
| factory default | state all | the | user adjustments for the signal | ||||
|
| currently being displayed. This is useful if a picture | ||||||
|
| become lost or confused. The Reset option can also be | ||||||
|
| accessed even if the OSD has been lost. | ||||||
|
|
|
|
|
|
|
|
|
|
| Controls the time after which the OSD display is cancelled. It can | ||||||
| OSD Timeout | be adjusted in | ||||||
|
| approximately. |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| Controls the position of the OSD display on the screen. Its default | ||||||
| OSD X and OSD Y | settings such as to place the OSD in the center of the screen, but | ||||||
|
| the user can adjust its position with these functions. | ||||||
|
|
|
|
|
|
|
|
|
|
| Yes/No. If an input signal changes, it is first measured and | ||||||
|
| compared with stored selections. If its parameters are already | ||||||
|
| stored, they are installed. If they are stored, the “Auto Centering” | ||||||
|
| selection is checked and if set to “No” the best fit is displayed. The | ||||||
|
| user can then center the picture using OSD auto setup. If Auto | ||||||
| Auto Centering | Centering is set to “Yes”, centering is performed automatically, | ||||||
|
| which may take more than 15 seconds. This could cause a prob- | ||||||
|
| lem if using Windows, wherein a resolution change is displayed | ||||||
|
| only for 15 seconds and reverts to its previous selection if no | ||||||
|
| acknowledgement is entered. For this reason, the default state is | ||||||
|
| “No”. NOTE this control only configures Analog Graphics inputs. | ||||||
|
|
|
|
|
|
|
|
|
| The Miscellaneous Menu |
|
|
| ||||
|
|
|
|
|
|
|
|
|
| OSD Agent | Description |
|
|
| |||
|
|
|
|
|
|
|
|
|
| Image Flip Horizontal | Flips the output image horizontally. |
| |||||
|
| Flips the output image vertically. Can only be used if the Frame | ||||||
| Image Flip Vertical | Store option is fitted and the input signal resolution is either video or | ||||||
|
| computer graphics (SVGA or lower). | ||||||
|
|
|
|
|
|
|
|
|
|
| Improves the appearance of fine text from a computer generated | ||||||
| Text Enhance / | analog input signal. Please note this function will only be effective if | ||||||
| the signal resolution is close to the resolution of the panel, no harm | |||||||
| Normal | will be done to the unit by trying the enhanced and normal text | ||||||
|
| options for other input resolutions. | ||||||
|
|
|
|
|
|
|
|
|
|
| 9 |
|
|
|
| ||
VT181CH / VT181CHE User Guide |
|
|
|
| ||||
