VTech VT20-2420 user manual Registration, Handset Layout

Registration

Enter Base ID Code

1. After charging the Handset, remove it from its Charge Cradle; the screen will display:

OK

alternating with this screen:

2. If, after charging the Handset, you see:

MENU

3.	Press NEW. You will now see the ENTER BASE
	ID screen as described in step 1.
4.	Find the BASE ID Code by doing the following: (the Base must be in idle (OFF)
	mode)
	A. At the Base, press MENU
	B. Scroll down to DISPLAY BASE-ID

The Handset Layout

1

2

3

9

410

5						11
6
		L1	OFF	L2		12
	FLASH		CLEAR		FLASH
	1		2 ABC	3	DEF	13
7
	4 GHI		5 JKL	6	MNO
	7 PQRS		8 TUV	9 WXYZ
	*	TONE	0 OPER	#		14
8						15

HANDSFREE INTERCOM/ VOLUME

TRANSFER

2.4GHz GIGAPHONE

16

	C. Press OK. The Base screen will display the 15-digit ID Code for approximately
	30 seconds. Afterwards, it will return to the idle screen.
5.	Enter the 15-digit Base ID Code into the Handset; then press OK.
6.	Wait approximately 15 to 60 seconds. You
	will hear confirmation beeps from the Base

and Handset. The newly registered Handset will now assign itself the lowest handset number not previously assigned to a different system Handset (1 through 8).

7.If the Handset displays REJECTED BY BASE or continues to display SEARCHING FOR BASE for well beyond 60 seconds, try the registration process again by repeating the above steps.

Congratulations! You can now enjoy the benefits of your 2-Line VTECH Multi-Handset system.

1.Antenna

2.Message Waiting Indicator

3.Earpiece

4.Headset Jack (2.5mm)

5.Scroll Keys

6.Line 1 (Flash)

7.Dialing Keys (0-9,*,#)

8.Handsfree Speakerphone

9.LCD Display

10.Select/OK

11.Off (Clear)

12.Line 2 (Flash)

13.Battery Compartment (back of handset)

14.Intercom/Transfer

15.Volume

16.Microphone

6 7